Shop by Category
HFNC / HIGH FOW
SLEEP LAB
BILEVEL
CPAP
PORTABLE CPAP
MASK
ACCESSORIES
OXYGEN CONCENTRATOR
POWER WHEEL CHAIR
COMMODE CHAIR
COMMODE WHEELCHAIR
WALKING STICKS
WALKING CRUTCH
WALKER
SHOWER CHAIRS
SCOOTER
BACKREST
STRETCHERS
RESMED AIRSTART 10 devices comes in Auto adjusting airway pressure (APAP) and continuous positive airway pressure (CPAP) . In this device designed easy to use . It includes an SD card that records a data as well as AHI . It can removed a data to see a therapy report tracking. In this device breathing comfort includes expiratory pressure relief (EPR) with easy breathe technology it provide a comfort features air is delivery in a smooth natural breathing pattern. It high tech features for better therapy. In this device have power save mode to save electricity .
• Continuous positive airway pressure (CPAP) is a method for patient who have sleep apnea disorders.obstructive sleep apnea is a sleep disorders when your breathing stop and starts.
• Obstructive sleep apnea causes interruption breathing often because your throat or airway temporarily block them.
• A CPAP machine works a compressor motor generates a continuous steam of pressurized air that travel through an air filter into a flexible tube.
• The machine works on a steady floe of pressurized air into your nose and mouth as you sleep it keep your airways helps breathe normally.
• The airstream from the CPAP machine pushes against any blockages opening your airways so your lungs receives plenty of oxygen.
• It improves your ability to sleep without walking up.
• It lowers your risk of having a heart attack stroke or other cardiovascular attack.
• It hepls lower your blood pressure.
• It reduces daytime sleepiness.
• It may reduce blood glucose and cholesterol level.
• Blood pressure
• Heart disease
• Reduce stroke risk
• Upper airway resistance syndrome
• It offers excellent value for those seeking a basic therapy device that’s simple to set up and use.
• Therapy made easy.
• Excellent value.
• Heated humidification may help reduce the common side effects of therapy, such as nasal congestion and a dry nose or throat, to deliver even more comfort during the night. Every AirStart 10 therapy device comes with a built-in humidifier
| power supply unit | AC input range: 100–240V, 50–60Hz 1.0–1.5A, Class II 115V, 400Hz 1.5A, Class II (nominal for aircraft use) DC output: 24V 3.75A Typical power consumption: 53W (57VA) Peak power consumption: 104W (108VA) |
| Environmental conditions | Operating temperature: +5°C to +35°C Note: The air flow for breathing produced by this therapy device can be higher than the temperature of the room. Under extreme ambient temperature conditions (40°C) the device remains safe. Operating humidity: 10 to 95% relative humidity, non-condensing Operating altitude: Sea level to 2,591 m; air pressure range 1013 hPa to 738 hPa Storage and transport temperature: -20°C to +60°C Storage and transport humidity: 5 to 95% relative humidity, non-condensing |
| Electromagnetic compatibility | The AirStart 10 complies with all applicable electromagnetic compatibility requirements (EMC) according to IEC60601-1-2:2007, for residential, commercial and light industry environments. It is recommended that mobile communication devices are kept at least 1 m away from the device. |
| Sensors | Pressure sensor: Internally located at device outlet, analogue gauge pressure type, -5 to +45 cm H2O (-5 to +45 hPa) Flow sensor: Internally located at device inlet, digital mass flow type, -70 to +180 L/min |
| Maximum single fault steady pressure | Device will shut down in the presence of a single fault if the steady state pressure exceeds: 30 cm H2O (30 hPa) for more than 6 sec or 40 cm H2O (40 hPa) for more than 1 sec. |
| Sound | Pressure level measured according to EN ISO 17510-1:2009 (CPAP mode): SlimLine: 26.6 dBA with uncertainty of 2 dBA Standard: 26.6 dBA with uncertainty of 2 dBA Power level measured according to EN ISO 17510-1:2009 (CPAP mode): SlimLine: 34.6 dBA with uncertainty of 2 dBA Standard: 34.6 dBA with uncertainty of 2 dBA |
| DIMENSIONS | 116 mm x 205 mm x 150 mm |
| Temperature | Maximum heater plate: 68°C Cut-out: 74°C Maximum gas temperature: £ 41°C |
| Air filter | Standard: Material: Polyester non woven fibre Average arrestance: >75% for ~7 micron dust Hypoallergenic: Material: Acrylic and polypropylene fibres in a polypropylene carrier Efficiency: >98% for ~7-8 micron dust; >80% for ~0.5 micron dust |
| Operating pressure range APAP, CPAP | 4 to 20 cm H2O (4 to 20 hPa) |
| Supplemental oxygen Maximum flow | 4 L/min |
| NOTE | The manufacturer reserves the right to change these specifications without notice. · Do not use electrically conductive or antistatic air tubing.
· The temperature and relative humidity settings displayed are not measured values. |