Shop by Category
All
0 Cart
No products in the cart.
Login / Register
Back to Products
0
No products in the cart.

Shopping Cart

No products in the cart.

Categories

Menu Categories Search Cart

Menu

H80A
H80A
H80A
H80A

H80A

Brand: BMC

SKU: hfnc0002

₹165,000.00

  • H-80 series Respiratory High-flow Therapy Device is for the treatment of spontaneously breathing patients who would benefit from receiving high flow warmed and humidified respiratory gases. This device is for patients by prescription in the home or hospital/institutional environment.
  • The device is only allowed to be used after the physician provides guidance for the patient and targeted setting of the device; the physician should ensure that the patient understands all functions and methods of operation of the device.
  • The HFNC oxygen therapy is carried out using air \ oxygen blender, active humidifier single heated tube and nasal cannula it is respiratory support.
  • The HFNC continuous to increase easily set up it may also create positive pharyngeal pressure to reduce work of breathing the device midway classical oxygen delivery system like high concentrations CPAP generators .
  • It is designed a heated humifided mixture of air and oxygen at a high flow than the inspiratory flow.
  • It adjust the flow rate and body weight provides a degree of distending pressure. It also decrease works of breathing and oxygenation .
  • It utilizes a soft large bore nasal prongs it is similar to used on mechanical ventilator with the HFNC. It overcome the leading causes of discomfort seen with conventional oxygen therapy.
  • It is a difficult quality level of PEEP generated by the high flow. It support breathing in people with acute heart failure , Acute respiratory distress syndrome.
  • It avoids rebreathing of co2 gas and therefore decreased anatomize dead space. It promoted a slow and deep breathing .it airway hydrated and it improved mucus clearance .
  • This improves FRC and reduce work of breathing it flows used are high humidification is necessary to avoid drying of respiratory secretions and for maintaining nasal cilia function .
  • It is mild positive airway pressure and lung volume recruitment.
  • It will titrate FIO2 and flow to promote comfort and oxygen saturation. It ensure the monitor spo2 saturation and pleth wave form.
  • It ensure maintain a o2 saturation on NRB mask
  • It delivery of optimally humidified and warm gases
  • It decreased body energy expenditure.
  • It is used for intubation and extubation support as well as treatment and prevention of post operative respiratory failure and for oxygenation patients during trails or bronchoscopy.
    • Quantity

    Categories: HFNC / HIGH FOW, HIGH FLOW

  • The HFNC oxygen therapy is carried out using air \ oxygen blender, active humidifier single heated tube and nasal cannula it is respiratory support.
  • The HFNC continuous to increase easily set up it may also create positive pharyngeal pressure to reduce work of breathing the device midway classical oxygen delivery system like high concentrations CPAP generators.
  • It is designed a heated humifided mixture of air and oxygen at a high flow than the inspiratory flow. It adjusts the flow rate and body weight provides a degree of distending pressure.
  • It also decrease the work of breathing and oxygenation. It utilizes a soft large bore nasal prongs it is similar to used on mechanical ventilator with the HFNC.
  • It overcomes the leading causes of discomfort seen with conventional oxygen therapy. It is a difficult quality level of PEEP generated by the high flow. It support breathing in people with acute heart failure, acute respiratory distress syndrome.
  • It avoids rebreathing of co2 gas and therefore decreased anatomize dead space. It promoted a slow and deep breathing. It airway hydrated and it improved mucus clearance.
  • This improves FRC and reduce work of breathing it flows used are high humidification is necessary to avoid drying of respiratory secretions and for maintaining nasal cilia function.
  • It is mild positive airway pressure and lung volume recruitment. It will titrate FIO2 and flow to promote comfort and oxygen saturation. It ensures the monitor spo2 saturation and pleth wave form. It ensures maintain an o2 saturation on NRB mask It delivery of optimally humidified and warm gases It decreased body energy expenditure. It is used for intubation and extubation support as well as treatment and prevention of post operative respiratory failure and for oxygenation patients during trails or bronchoscopy.
  • Automatic monitoring of target concentration of oxygen, system supply of oxygen 21% -100%, exact to 1%;
  • the supporter may be a wall oxygen source, oxygen cylinder, and oxygen generator;
  • No maintenance is needed for the built-in ultrasonic oxygen sensor.
  • 9-stage temperature humidification: 29-37, precisely 1.
  • The advanced dual-fan design can accommodate patients of most ages at two levels of Flow & LFlow, 2L / min ~ 80L / min.
  • Revolutionary moisture compensation feature at 7 stages, which ensures adjustable moisture compensation ± 3, easily dealing with the different harsh temperatures and moisture conditions.
  • Strong Flow Innovative Design
  • Real-time oxygen concentration monitoring, flow, temperature monitoring, sPEEP monitoring.
  • In high flow mode, flow rate is 2 L / min ~ 80 L / min, which can set the concentration of inhaled oxygen automatically

    • -

    Device Size

    Dimensions: 

     

    		335 mm × 227 mm × 158 mm

    Weight:

     

    		about 4 kg
    Water capacity:To maximum fill line 235 mL
    Product Use, Transport and Storage
     OperationTransport and Storage
    Temperature:18°C to 28°C (64.4˚F to 82.4˚F)-25°C to +70°C (-13˚F to +158˚F)
    Humidity:≤ 93% Non-condensing≤ 93% Non-condensing
    Atmospheric Pressure:760 to 1060 hPa760 to 1060 hPa
    Heated Humidifier
    Humidifier Output:No less than 33 mg/L, at 37 °C target
    Maximum Delivered Gas Temperature:≤ 43°C
    Mode of OperationContinuous
    Work ModeHFlow, LFlow, AutoFlow, SmartFlow
    SD CardSD card can record data and fault information
    AC Power Consumption220 V - 240 V ～, 50 Hz / 60 Hz, 2.5 A
    Electric Shock
    Type of Protection Against Electric ShockClass II Equipment
    Degree of Protection Against Electric ShockType BF Applied Part
    Degree of Protection Against Ingress of WaterIP22
    Sound Power Level＜30 dB, When the working mode of the device is HFlow, and the output flow is 25 L/min
    Maximum oxygen input flow80 L/min
    FiO2

    Range: 21% ～ 100 %, binning interval 1%

    Margin of Error: ± (5% + 5% set value)

    FiO2 Display Accuracy± (5% + 5% set value)
    TempRange: 25°C ～ 45°C
    Temp Display Accuracy± 2°C
    Flow

    Range: 2 L/min ～ 80 L/min

    Margin of Error: ± (2 L + 10% set value)

    Flow Display Accuracy± (2 L + 10% set value)
    sPEEP

    Range: 0 ～ 20 hPa

    Margin of Error: ± (1 hPa + 20% set value)

    Humidity CompensationRange: -3～3，-3、-2、-1、0、1、2、3, the higher the range, the higher the humidification output
    Flow Step IntervalRange: 15 L/min ～ 80 L/min
    Tube

    Length: 1.8 m

    Margin of Error: ± 10%

    The connection should not fall off under the 45 N tension.

    Specification of Patient Connectorφ 18 mm cone joint
    Heater Plate AC Power Consumption220 V - 240 V ～, 50 Hz / 60 Hz, 1 A
      Download Brochure

    Related products