Shop by Category
HFNC / HIGH FOW
SLEEP LAB
BILEVEL
CPAP
PORTABLE CPAP
MASK
ACCESSORIES
OXYGEN CONCENTRATOR
POWER WHEEL CHAIR
COMMODE CHAIR
COMMODE WHEELCHAIR
WALKING STICKS
WALKING CRUTCH
WALKER
SHOWER CHAIRS
SCOOTER
BACKREST
STRETCHERS
• The AirFit P10 channels airflow noninvasively to a patient from a positive airway pressure (PAP) device such as a continuous positive airway pressure (CPAP) or bi-level device.
• The AirFit P10 is:to be used by patients (> 66 lb (30 kg)) for whom positive airway pressure has been prescribed Intended for single-patient re-use in the home environment and multipatient re-use in the hospital/institutional environment.
• The Resmed Airfit p30i is designed to keep air tubing out of signal.
• It quiet air vent reduces sound to 21 decibel quieter than a soft whisper.
• It slips on design makes it simple to put on and take off.
• Quick release elbow allows getting up and righting and disconnecting without removing the mask.
• The nasal pillow also rests securely in your nose which helps to keep the mask in the place as you switch sleep positions. It is exhalation pressure relief.
• Spring fit frame adjust to different facial profiles, helping provide an accurate fit for the time.
• Quiet release elbow allow patient to easily disconnect mask from tubing 360 degree rotation for greater freedom movement.
• Soft sleeves complement the streamline mask profile to comfortable experience. It designed to be inter chargeable.
• Septum bridge membrane ensures an intuitive fit and provides a stable steal all the way to tip of the nose through the night.
• It vent gently diffuses exhaled air designed to minimize noise and disturbance.
• The one-size-fits-all headgear has minimal touch points on the face and connects to the frame in the back of the head.
• The Velcro straps can be adjusted and will securely stay in position all night.
Categories: MASK, PILLOW MASK
• Nasal pillow mask are cushions that seal at the base of the nostrils and are help in place with a stretchy strap that goes around the back on head. • It reduce air leakage since they direct air into the patients nasal passangers. They work well for patient with a beard or mustache. • Nose breathers. • It lots of facial hair that with other mask types can prevent the mask from making seal with your skin • Active sleepers • It may cause nasal dryness or nose bleeds. • More natural airflow than nasal pillow as the deliverd pressure isn’t direct. • Better for higher pressure setting than nasal pillow. • It may experience higher incidences of nose bleeds or nasal dryness due to direct air pressure.
• Nasal Pillow mask that combines performance and reliability in a quiet, light, user-friendly format. • The AirFit P10 variant is designed to be as unobtrusive and comfortable as possible and feature a very discreet, highly effective QuietAir vent. • Easy to fit: QuickFit elastic headgear automatically adjusts to each patient’s head. It can be fitted in under 30 seconds. • User friendly: The mask’s minimalist three-piece design makes it easy for patients to assemble and clean, promoting acceptance and compliance. • Intuitive: The AirFit P10’s key-clip nasal pillows are colour coded for easy sizing and fast fitting, and also feature left/right-orientation so patients can instantly see what side faces up and what side faces down. • Comfortable: The nasal pillows seal on contact, with trampoline action that lets patients move around freely and comfortably without compromising seal. • Ultralight design is 50% lighter and 50% quieter • Dual-wall silicone nasal pillow system keeps a secure but comfortable seal • Only 3 pieces, so it’s easy to clean, assemble, and maintain, with fewer replacement parts • QuietAir vents reduce sound to only 21 decibels 1 – quieter than a soft whisper.
| PRESSURE FLOW CURVE | The mask contains passive venting to protect against rebreathing. As a result of manufacturing variations, the vent flow rate may vary PRESSURE (Cm H20) FLOW (L/MIN) 4 20 8 29 12 37 16 43 20 49 |
| DEAD SPACE INFORMATION | Physical dead space is the empty volume of the mask to the end of the swivel. Using the large cushions it is 123 mL. |
| THERAPY PRESSURE | 4 to 20 cm H2O |
| RESISTANCE | Drop in pressure measured (nominal) at 50 L/min: 0.4 cm H2O at 100 L/min: 1.4 cm H2O |
| SOUND | DECLARED DUAL-NUMBER NOISE EMISSION VALUES in accordance with ISO 4871. The A-weighted sound power level of the mask is 21 dBA, with uncertainty of 3 dBA. The A-weighted sound pressure level of the mask at a distance of 1 m is 13 dBA, with uncertainty of 3 dBA |
| ENVIRONMENTAL CONDITIONS | Operating temperature: +41°F to 104°F (+5°C to +40°C) Operating humidity: 15% to 95% non-condensing Storage and transport temperature: -4°F to 140°F (-20°C to +60°C) Storage and transport humidity: up to 95% relative humidity non-condensing |
| GROSS DIMENSION | Large: 23.23"" (H) x 5.87"" (W) x 1.18"" (D) (590 mm (H) x 149 mm (W) x 30 mm (D)) Mask fully assembled with short tube assembly (no headgear) |
| MASK SETTING | For S9: Select 'Pillows' For other devices: Select 'SWIFT' (if available), otherwise select 'MIRAGE' as the mask option. |